Code: STE01-DRU01-SS

Fully compliant lift circuits

All-electric lift drum tipper circuits we assemble are fully compliant with the relevant standards. Our engineers install mandatory safety features such as power isolators and emergency stop buttons to each and every unit. A battery condition meter located on the rear control panel informs operators of the state of charge of the battery; the unit makes use of a smart battery charger, this conditions the battery and when full provides a trickle charge.

Universal drum band

Drums are made using steel, plastic and fibreboard materials and sizes range from 50 to 220 litres. This model makes use of our universal drum rotator band. The segmented band can be adjusted to suit the range of drums mentioned above. Operators adjust the diameter of the band and then use the ratchet and strap to secure the drum in place. The band accommodates drums from 350mm to 600mm in diameter. For applications where only 200- to 220-litre steel and plastic drums are being emptied, we can supply a fixed diameter over-centre drum band. This securing arrangement has a fixed diameter and used rubber pads to grip the drum. This band is very fast and simple to use making it a popular choice. 

Stainless steel materials

The chassis uses hot-rolled stainless steel channels which are strong and durable, stainless steel bearings run the lift carriage up and down the channels smoothly. The hydraulic lift ram and rotational gearbox assembly are both sheaved in stainless steel to protect them from corrosive environments. Stainless steel parts are either mechanically polished or aqua blasted using an aluminium oxide and glass bead blasting process. The finish of the stainless steel is both smooth and clean, well suited to food and pharmaceutical environments.

Self-locking gearbox

A self-locking rotational gearbox rotates the drum when an operator turns the handle; the self-locking properties of the worm-wheel gearbox means drums never self-rotates when the handle is let go of. The 120:1 gearbox ratio is easy to turn by hand and is therefore controllable by operators of all sizes and strengths. Where many drums are handled per day we can provide a power rotation model, the control to the rotation would be located on the rear panel in this case. 

Controllable rear-wheel steering

Steering is controlled using a tiller at the back of the unit. The steering moves both rear castors providing exceptional control and manoeuvrability. The unit can achieve a tight turning radius when being used in narrow work areas.  We use premium wheels and castors in the assembly of our equipment. All the wheels we use are fitted with precision ball bearings to minimise rolling resistance making the unit easy to move around the factory floor.

Drum rotator suitability

This INOX Universal Drum Rotator is able to handle steel, plastic and fibreboard drums of between 50- to 220-litres. View the drum suitability document below by clicking the button. If you are handling drums that are not shown and would like advice, please get in touch with our product team.

Video

Others

Our Other Similar Products

You can also review our other products in this category. Please click the button below.

Drum Tippers and Rotators
1 : 00 AM

Hour
Minutes
AM PM
1 2 3 4 5 6 7 8 9 10 11 12